What is the wiring of the temperature control switch
1) When using contact sensing installation, the metal cover should be tightly attached to the installation surface of the controlled instrument. To ensure the temperature sensing effect, thermal conductive silicone grease or other similar thermal conductive media should be coated on the temperature sensing surface
2) During installation, do not collapse, loosen or deform the top of the cover to avoid affecting its performance
3) Do not allow liquid to seep into the interior of the temperature controller or apply excessive force to cause cracks in the casing. Do not change the shape of the external terminals at will, which may affect electrical reliability. Adequate insulation protection measures should be taken to prevent leakage and ensure safe use< When the product is used in circuits with a current not exceeding 5A, copper core wires with a cross-sectional area of 0.5-1mm2 should be selected for connection; For use in circuits with a current not exceeding 10A, copper core wires with a cross-sectional area of 0.75-1.5mm2 should be selected for connection
5) The product should be stored in a ventilated, clean, dry, and non corrosive gas warehouse with a relative humidity of less than 90% and an ambient temperature below 40 ℃
Temperature control switch is a relatively flexible type of switch that provides certain protection for our safety. Regarding the wiring of the temperature control switch, although it was not explained in detail, we have read some precautions and should now know how to do it. We also need to choose good products for switches, otherwise it is easy to cause some unsafe problems
